BTS4000-5V6A | Battery Testing System

Battery testing machine for any rechargeable battery with-in the range of 0 - 5V system, capable of handling 0 - 6 amps for cycle testing to test the battery. RPE teams up with Neware to bring you a battery tester for all your battery testing needs. 

This Item is In Stock!

Download Spec Sheet Here 

Package Contains:

1. Aligator Battery clamps 
2. 1 Battery Tester System 
3. 1 Master Unit Control System 
4. User Manual System 

Items Values

• Input AC AC 110V ±10% / 50Hz
• Input power 709 W
• Resolution AD：16bit；DA：16bit
• Input impendence ≥1MΩ

Voltage

• CV output range 0.025V~5V
• Min discharge voltage 2.5V
• Accuracy ± 0.1% of FS
• Stability ± 0.1% of FS

Current

• Output range/channel 0.05A~10A
• Accuracy ± 0.1% of FS
• CV cut-off current 0.02A
• Stability ± 0.1% of FS

Power

• Output power/channel 50 W
• Stability ± 0.2% of FS

Time

• Current response time Max rising time:20ms
• Working step time ≤(365*24)h/step Time format-00：00：00.000(h、m、s、ms)

Data

Data record conditions

• Min data record interval:100ms
• Min voltage change：10mV
• Min current change：20mA
• Frequency 10Hz

Charge

• Charge modes CC、CV、CCCV、CP、CCCV for battery pack
• Cut-off condition Voltage、Current、Time、Capacity、-△V

Discharge

• Discharge modes CV、CP、CR
• Cut-off condition Voltage、Current、Time、Capacity、-△V

Pulse

• Charge CC、CP
• Discharge CC、CP
• Min pulse width 500ms
• Pulse counts Up to 32
• Chg and Dischg switch Supported
• Cut-off condition Voltage、Time
• DCIR Supported
• CH parallel output current > 100A, then supported, in parallel mode pulse function is disabled

Cycles

• Max cycles 65535
• Max steps 254

Nest 3

• Power-off data protection

Protection

• Off-line operation mode
• User-defined protection conditions, such as
• upper and lower limited current/voltage, delay
• time, temperature, etc.

Hardware protection

•  Full proof protection with hardware protection level IP20

Channels feature

• Independent pairs of closed-loop for constant

Channels control

• mode Independent control

Data acquisition method

• Kelvin connection
• Noise <85dB
• Database MySQL
• Communication TCP/IP
• Data Export Excel, TXT, PDF
• Disk space 500GB
• Leak current 0.005mA
• OS Windows 7,
• Communication port Ethernet port

Operation and storage environment requirement

• Items Values
• Operation environment temperature
• 0℃~40℃ (When the temperature is 25±10℃, the
• accuracy error caused by temperature change is less than50ppm /℃)
• Storage environment temperature -10℃~50℃
• Operation environment humidity ≤70% RH(no moisture condensation)
• Storage environment humidity ≤80% RH(no moisture condensation)